Our machines

Our machines

Ibarmia ZVH 45 L3000 Star

The Ibarmia is the most advanced milling machine in our machine park. This milling machine has a turntable that can run at a maximum of 17 revolutions per minute. This gives us access to 5-axis manufacturing.

  • Bed dimensions: 3000×850 mm
  • Maximum bed load: 3850 kg
  • XYZ-travel: 3000x800x800 mm
  • Spindle power: 27 kW
Soraluce TA-35

The Soraluce is a large CNC-machining centre which is fitted with a 5-axis turret. This machine is used to machine large parts. The machine is capable of interchanging it’s own tools.

  • Table size: 3700×1000 mm
  • Maximum table capacity: 7.800 kg
  • XYZ-travel: 3500x1200x1250 mm
  • Weight: 18.500 kg
  • Spindle power: 28 kW
Hyundai-Kia WIA F500

The WIA F500 is an advanced CNC-controlled machining centre which is used for the production of complicated parts. Slo-Rid b.v. owns two of these machiningcentres.

  • Table size: 1200×500 mm
  • Maximum table capacity: 800 kg
  • XYZ-travel: 1060x510x635 mm
Quaser MV204II

The Quaser MV204 is a CNC-controlled machining centre which is mostly used for simple serial production.

  • Table size: 1400×700 mm
  • Maximum table capacity: 1000 kg
  • XYZ-travel: 1270x700x610 mm
Topturn CNC-S50

This massive CNC-controlled lathe is the biggest lathe that Slo-Rid b.v. currently uses. It is used for the production bearing housings and other products that are simply too large for the other lathes.

  • Maximum turning diameter: 970 mm
  • Maximum turning length: 2.000 mm
  • Spindle bore: 535 mm
  • Power: 60 kW
Hyundai-Kia SKT400LC and SKT400LMC

These CNC-controlled lathes are used for the production of large axles for the blenders, as well as long hydraulic cilinders. They are fitted with a pneumatic crane for faster serial production and feauture a turret that supports powered tools. Slo-Rid b.v. owns two of these CNC-controlled lathes.

  • Maximale draaidiameter 630 mm
  • Maximum turning length: 2120 mm
  • Spindle power: 30 kW
  • Weight: 10.850 kg
Hyundai-Kia SKT400LC met Fanuc robot

This version of the Hyundai-Kia CNC-controlled lathe is equipped with a Fanuc robot, which allows it to operate continuously.

  • Maximale draaidiameter 630 mm
  • Maximum turning length: 2120 mm
  • Spindle power: 30 kW
  • Weight: 10.850 kg
DMC DL 30

The DMC DL30 has recently replaced one of our Colchester CNC lathes. It features a modern and more advanced user interface which enables Slo-Rid b.v. to machine complex designs faster.

  • Maximum spindle speed: 3000 rpm
  • Spindle bore diameter: 105 mm
  • Weight: 7050 kg
DMC DL 21LMA

This is the most modern CNC-controller lathe that Slo-Rid b.v. uses for production. It is capable of fast serial production and is easier to program than other lathes of this size that Slo-Rid b.v. currently owns. It supports powered tools.

  • Maximum turning diameter: 280 mm
  • Maximum turning length: 500 mm
  • Spindle power: 15 kW
  • Weight: 3950 kg
Takisawa LA-450 met Fanuc robot

This modern Takisawa is fitted with a Fanuc robot which allows it to run continous serial production. It is a very fast lathe, which makes it ideal for this type of serial production.

  • Maximum turning diameter: 550 mm
  • Maximum turning length: 800 mm
  • Spindle power: 26 kW
Colchester Tornado 300

The Colchester Tornado is a medium sized CNC-controlled lathe. At Slo-Rid b.v. this machine is primarily used for the production of small parts.

Slo-Rid b.v. currently owns two Colchester Tornados.

  • Maximum turning diameter: 300 mm
  • Spindle bore: 90,5 mm
  • Spindle power: 22 kW
  • Weight: 3.300 kg
KASTOwin A 4.6

This fully automatic sawing machine is used to cut all materials that are required for our production. This machine is capable of cutting different grades of material like Inconel, Duplex stainless steel and CuNiAl.

  • Maximum cutting width: 460mm
KASTOwin tube A 5.0

The KASTOwin tube is a fully automated sawing machine which is specialized for cutting pipes. The automatic feed can feed up to 5 small diameter pipes at the same time. Special about this machine, is that the blade starts cutting from under the pipes, instead of from the top of the pipes. This is ideal for pipes, since the pipes do not apply pressure to the teeth of the saw this way.

  • Maximum cutting width: 500mm
Fanuc Robodrill Alpha-T10B

Our Fanuc Robodrill is a small computer controlled machining centre. It is ideal for automatically drilling and tapping thread into various components, like the hole inside a sprocket that is used to clamp it onto an axle.

  • XYZ-travel: 508x380x300 mm
  • Spindle power: 5,5 kW
Verlinde Euroblock VT2 Overhead crane

Each of our factory halls features at least two Verlinde overhead cranes. This gives each department a maximum hoist capacity of 10 tonnes. The cranes are operated by using a remote.

  • Maximum hoist capacity per crane: 5.000 kg
Welding division

Slo-Rid b.v. has 4 seperate well equipped seperated welding booths, which are used for welding sheet metal and medium sized constructions. Eacht cabin features both a TIG and a MIG welder which makes it possible to weld stainless steel, aluminum and regular steel.